NeoLumn8! Mazda MX-5 ND/ND2 LED Running Light Kit
A few years ago, I created NeoStrip for my ND2 that garnered a fair bit of interest, so decided to share the love. NeoLumn8 is a spin-off of the original with more features. It's a plug-and-play install with no wire cutting or soldering, and to keep it simple and easy to install, the entire system lives in the trunk (boot!). Installation takes about 20 minutes and a detailed installation page with videos is available. What…
Falling PixelSand on T-Display S3 ESP32
I make and sell NeoIumn8 which is a dynamic rear LED strip with a number of sequences made for various years of the Mazda Miata ND2+. For my own ND2, I built wireless controller to remotely change the sequences and have some fun with it. It's mounted in the right side dash vent. One of the screens takes advantage of an accelerometer to move a doughnut around on the screen (mmmm dooonuts!). I came across…
Kasa HS200/HS220 Remote Power Switch Seeed XIAO ESP32-S3
So, I made another thing. Had a need to build a remote power switch for my TP-Link Kasa HS200 switch. First thing going through your mind is, why? Have a watch of the video below to find out! Code and 3D files below. BOM: SEEED XIAO ESP32-S3 Push Button 600 mA LiPo (find a size that fits 35mm x 21mm or less) Code: 3D Files: MakerWorld
Make your Ninebot Max Dazzle with these DIY NeoPixel LEDs
Having an interest in all things "hackable", I recently got into the e-scooter game. I managed to find a Ninebot Max G30LP on FB on the cheap that had some issues - namely the rear tire needed replacing, the steerer tube was loose and needed some JB weld, and the motor controller wires had nearly melted through. Yikes! Lucky looking at the guts of this thing was the first thing I did. I replaced them…
DIY 110dB Digital Horn: Coming Through!
I do a lot of trail riding, and being a steward of good riding etiquette, I use a digital horn (more of a "beeper") to alert hikers when I'm approaching. Most are appreciative of the gesture, and there are always some who seem to think trails are for hiking only. So, a high pitched loud chirp does the trick and also makes for a good laugh as some think it's their phones or strange birds.…
Protected: NeoLumn8: Rear Dynamic LED Strip Installation Instructions
This content is password protected. To view it please enter your password below: Password:
Protected: (DEPRECIATED) NeoLumn8: Rear Dynamic LED Strip Installation Instructions (prior to V3)
This content is password protected. To view it please enter your password below: Password:
Mazda Miata ND2 ODBII Info on 2.1″ IPS Display Mounted in Custom Printed Air Vent
Tag along on my journey of creating a controller for my Neolumn8 and ODBII info display. I'll b e modding a LilyGo T-RGB " IPS display into a custom-3D printed air vent. I'll be doing a series of videos as I model and print the vent + mounting components, build and program the display and features, then install and fit in the Miata. Be sure to subscribe here and on my YouTube channel (below) to…
NeoBrake Sequential LED Third Brake Light Kit
Third brake light with a NeoBrake LEDs with controller/enclosure and input leads for 12V brake line. Designed for Mazda Miata NC model (can be adapted for different sizes & vehicles). These are custom made kits. Interested? drop me a line. Also check out my NeoLumn8 Rear Sequential Light kit. How It Works: The LED sequence triggers on braking (which powers the unit). Video below. When brakes are released the unit powers off (regardless if it…